IMSI Catcher Fix

IMSI Catcher module is problematic due to a defect in the time of the packaging. You can solve the problem as follows until the new iso file is published.



sigintos@sigintos: cd /opt/sigintos/Sigintos
sigintos@sigintos: sudo pip install scapy
sigintos@sigintos: sudo setcap cap_net_raw=eip /usr/sbin/tcpdump
sigintos@sigintos: sudo setcap cap_net_raw=eip /usr/bin/python2.7

2 Comments

  1. Here’s the result of the command:

    sudo pip install scapy
    The directory ‘/home/sigintos/.cache/pip/http’ or its parent directory is not owned by the current user and the cache has been disabled. Please check the permissions and owner of that directory. If executing pip with sudo, you may want sudo’s -H flag.
    The directory ‘/home/sigintos/.cache/pip’ or its parent directory is not owned by the current user and caching wheels has been disabled. check the permissions and owner of that directory. If executing pip with sudo, you may want sudo’s -H flag.
    Collecting scapy
    Downloading https://files.pythonhosted.org/packages/d0/04/b8512e5126a1816581767bf95cbf525e0681a22c055bcd45f47ecff60170/scapy-2.4.2.tar.gz (795kB)
    100% |████████████████████████████████| 798kB 127kB/s
    Installing collected packages: scapy
    Running setup.py install for scapy … done
    Successfully installed scapy-2.4.2
    You are using pip version 8.1.1, however version 19.0.2 is available.
    You should consider upgrading via the ‘pip install –upgrade pip’ command.

    The other commands appeared to work without a message of any sorts.

    I have BladeRF 2.0 micro xA4 attached. but I don’t see any GSM catcher response in Michigan at the default freq.
    I have a HackRF avail but not connected. I don’t have an RTL-SDR. Do I need all 3 connected concurrently? The IMSI catcher makes it seem as if all 3 devices need to be running. Is this true?

  2. Dear Glen;
    You can download the updated version 1.0.1 and use it smoothly. Don’t need 3 connected device for IMSI Catcher, it is enough for any device to be active. You can change default frequency with mouse click. BladeRF 2.0 micro was tested and working nice with Imsi Catcher

Leave Comment

Your email address will not be published. Required fields are marked *